Learn the UNIX/Linux command line
Home Man Pages
lftp(1) lftp(1)
NAME
lftp - Sophisticated file transfer program
SYNTAX
lftp [-d] [-e cmd] [-p port] [-u user[,pass]] [site]
lftp -f script_file
lftp -c commands
lftp --version
lftp --help
VERSION
This man page documents lftp version 3.0.4.
DESCRIPTION
lftp is a file transfer program that allows sophisticated ftp, http
and other connections to other hosts. If site is specified then lftp
will connect to that site otherwise a connection has to be established
with the open command.
lftp can handle seven file access methods - ftp, ftps, http, https,
hftp, fish, sftp and file (https and ftps are only available when lftp
is compiled with openssl library). You can specify the method to use
in 'open URL' command, e.g. 'open http://www.us.kernel.org/pub/linux'.
hftp is ftp-over-http-proxy protocol. It can be used automatically
instead of ftp if ftp:proxy is set to 'http://proxy[:port]'. Fish is a
protocol working over an ssh connection to a unix account. SFtp is a
protocol implemented in ssh2 as sftp subsystem.
Every operation in lftp is reliable, that is any not fatal error is
ignored and the operation is repeated. So if downloading breaks, it
will be restarted from the point automatically. Even if ftp server
does not support REST command, lftp will try to retrieve the file from
the very beginning until the file is transferred completely.
lftp has shell-like command syntax allowing you to launch several com-
mands in parallel in background (&). It is also possible to group com-
mands within () and execute them in background. All background jobs
are executed in the same single process. You can bring a foreground
job to background with ^Z (c-z) and back with command 'wait' (or 'fg'
which is alias to 'wait'). To list running jobs, use command 'jobs'.
Some commands allow redirecting their output (cat, ls, ...) to file or
via pipe to external command. Commands can be executed conditionally
based on termination status of previous command (&&, ||).
If you exit lftp when some jobs are not finished yet, lftp will move
itself to nohup mode in background. The same happens when you have a
real modem hangup or when you close an xterm.
lftp has builtin mirror which can download or update a whole directory
tree. There is also reverse mirror (mirror -R) which uploads or
updates a directory tree on server. Mirror can also synchronize direc-
tories between two remote servers, using FXP if available.
There is command 'at' to launch a job at specified time in current
context, command 'queue' to queue commands for sequential execution
for current server, and much more.
On startup, lftp executes /etc/lftp.conf and then ~/.lftprc and
~/.lftp/rc. You can place aliases and 'set' commands there. Some
people prefer to see full protocol debug, use 'debug' to turn the
debug on. Use 'debug 3' to see only greeting messages and error mes-
sages.
lftp has a number of settable variables. You can use 'set -a' to see
all variables and their values or 'set -d' to see list of defaults.
Variable names can be abbreviated and prefix can be omitted unless the
rest becomes ambiguous.
If lftp was compiled with ssl support, then it includes software
developed by the OpenSSL Project for use in the OpenSSL Toolkit.
(http://www.openssl.org/)
Commands
! shell command
Launch shell or shell command.
!ls
To do a directory listing of the local host.
alias [name [value]]
Define or undefine alias name. If value is omitted, the alias is unde-
fined, else it takes the value value. If no argument is given the cur-
rent aliases are listed.
alias dir ls -lF
alias less zmore
anon
Sets the user to anonymous. This is the default.
at time [ -- command ]
Wait until the given time and execute given (optional) command. See
also at(1).
bookmark [subcommand]
The bookmark command controls bookmarks.
add [] add current place or given location
to bookmarks and bind to given name
del remove bookmark with name
edit start editor on bookmarks file
import import foreign bookmarks
list list bookmarks (default)
cache [subcommand]
The cache command controls local memory cache. The following subcom-
mands are recognized:
stat print cache status (default)
on|off turn on/off caching
flush flush cache
size lim set memory limit, -1 means unlimited
expire Nx set cache expiration time to N seconds (x=s)
minutes (x=m) hours (x=h) or days (x=d)
cat files
cat outputs the remote file(s) to stdout. (See also more, zcat and
zmore)
cd rdir
Change current remote directory. The previous remote directory is
stored as '-'. You can do 'cd -' to change the directory back. The
previous directory for each site is also stored on disk, so you can do
'open site; cd -' even after lftp restart.
chmod mode files
Change permission mask on remote files. The mode must be an octal num-
ber.
close [-a]
Close idle connections. By default only with the current server, use
-a to close all idle connections.
command cmd args...
execute given command ignoring aliases.
debug [-o file] level|off
Switch debugging to level or turn it off. Use -o to redirect the
debug output to a file.
echo [-n] string
guess what it does.
exit code
exit bg
exit will exit from lftp or move to background if jobs are active. If
no jobs are active, code is passed to operating system as lftp's ter-
mination status. If code is omitted, the exit code of last command is
used.
'exit bg' forces moving to background when cmd:move-background is
false.
fg
Alias for 'wait'.
find [directory]
List files in the directory (current directory by default) recur-
sively. This can help with servers lacking ls -R support. You can
redirect output of this command.
ftpcopy
Obsolete. Use one of the following instead:
get ftp://... -o ftp://...
get -O ftp://... file1 file2...
put ftp://...
mput ftp://.../*
mget -O ftp://... ftp://.../*
or other combinations to get FXP transfer (directly between two ftp
servers). lftp would fallback to plain copy (via client) if FXP
transfer cannot be initiated or ftp:use-fxp is false.
get [-E] [-a] [-c] [-O base] rfile [-o lfile] ...
Retrieve the remote file rfile and store it as the local file lfile.
If -o is omitted, the file is stored to local file named as base name
of rfile. You can get multiple files by specifying multiple instances
of rfile [and -o lfile]. Does not expand wildcards, use mget for that.
-c continue, reget
-E delete source files after successful transfer
-a use ascii mode (binary is the default)
-O destination file name (default - basename of rfile)
-c continue, reget
-E delete source files after successful transfer
-a use ascii mode (binary is the default)
--source-region=
transfer specified region of source file
--target-position=
position in target file to write data at
glob [-d] [-a] [-f] command patterns
Glob given patterns containing metacharacters and pass result to given
command. E.g. ''glob echo *''.
-f plain files (default)
-d directories
-a all types
help [cmd]
Print help for cmd or if no cmd was specified print a list of avail-
able commands.
jobs [-v]
List running jobs. -v means verbose, several -v can be specified.
kill all|job_no
Delete specified job with job_no or all jobs. (For job_no see jobs)
lcd ldir
Change current local directory ldir. The previous local directory is
stored as '-'. You can do 'lcd -' to change the directory back.
lpwd
Print current working directory on local machine.
ls params
List remote files. You can redirect output of this command to file or
via pipe to external command. By default, ls output is cached, to see
new listing use rels or cache flush.
mget [-c] [-d] [-a] [-E] [-O base] files
Gets selected files with expanded wildcards.
-c continue, reget.
-d create directories the same as file names and get
the files into them instead of current directory.
-E delete source files after successful transfer
-a use ascii mode (binary is the default)
-O specifies remote file name (default - basename of lfile)
-c continue, reput
it requires permission to overwrite remote files
-E delete source files after successful transfer (dangerous)
-a use ascii mode (binary is the default)
-O ', but the job will con-
tinue execution even if it is not the first in queue.
'queue stop' will stop the queue, it will not execute any new com-
mands, but already running jobs will continue to run. You can use
'queue stop' to create an empty stopped queue. 'queue start' will
resume queue execution. When you exit lftp, it will start all stopped
queues automatically.
'queue' with no arguments will either create a stopped queue or print
queue status.
queue --delete|-d [index or wildcard expression]
Delete one or more items from the queue. If no argument is given, the
last entry in the queue is deleted.
queue --move|-m [index]
Move the given items before the given queue index, or to the end if no
destination is given.
-q Be quiet.
-v Be verbose.
-Q Output in a format that can be used to re-queue.
Useful with --delete.
> get file &
[1] get file
> queue wait 1
> queue get another_file
> cd a_directory
> queue get yet_another_file
queue -d 3 Delete the third item in the queue.
queue -m 6 4 Move the sixth item in the queue before the fourth.
queue -m "get*zip" 1 Move all commands matching "get*zip" to the beginning
of the queue. (The order of the items is preserved.)
queue -d "get*zip" Delete all commands matching "get*zip".
quote cmd
For FTP - send the command uninterpreted. Use with caution - it can
lead to unknown remote state and thus will cause reconnect. You cannot
be sure that any change of remote state because of quoted command is
solid - it can be reset by reconnect at any time.
For HTTP - specific to HTTP action. Syntax: ''quote
[]''. Command may be ''set-cookie'' or ''post''.
open http://www.site.net
quote set-cookie "variable=value; othervar=othervalue"
set http:post-content-type application/x-www-form-urlencoded
quote post /cgi-bin/script.cgi "var=value&othervar=othervalue" > local_file
For FISH - send the command uninterpreted. This can be used to execute
arbitrary commands on server. The command must not take input or print
### at new line beginning. If it does, the protocol will become out of
sync.
open fish://server
quote find -name zip
reget rfile [-o lfile]
Same as 'get -c'.
rels [args]
Same as 'ls', but ignores the cache.
renlist [args]
Same as 'nlist', but ignores the cache.
repeat [delay] [command]
Repeat the command. Between the commands a delay inserted, by default
1 second. Example:
repeat at tomorrow -- mirror
repeat 1d mirror
reput lfile [-o rfile]
Same as 'put -c'.
rm [-r] [-f] files
Remove remote files. Does not expand wildcards, use mrm for that. -r
is for recursive directory remove. Be careful, if something goes wrong
you can lose files. -f supress error messages.
rmdir dir(s)
Remove remote directories.
scache [session]
List cached sessions or switch to specified session.
set [var [val]]
Set variable to given value. If the value is omitted, unset the vari-
able. Variable name has format ''name/closure'', where closure can
specify exact application of the setting. See below for details. If
set is called with no variable then only altered settings are listed.
It can be changed by options:
-a list all settings, including default values
-d list only default values, not necessary current ones
site site_cmd
Execute site command site_cmd and output the result. You can redirect
its output.
sleep interval
Sleep given time interval and exit. Interval is in seconds by default,
but can be suffixed with 'm', 'h', 'd' for minutes, hours and days
respectively. See also at.
slot [name]
Select specified slot or list all slots allocated. A slot is a connec-
tion to a server, somewhat like a virtual console. You can create mul-
tiple slots connected to different servers and switch between them.
You can also use slot:name as a pseudo-URL evaluating to that slot
location.
Default readline binding allows quick switching between slots named
0-9 using Meta-0 - Meta-9 keys (often you can use Alt instead of
Meta).
source file
source -e command
Execute commands recorded in file file or returned by specified exter-
nal command.
source ~/.lftp/rc
source -e echo help
suspend
Stop lftp process. Note that transfers will be also stopped until you
continue the process with shell's fg or bg commands.
user user [pass]
user URL [pass]
Use specified info for remote login. If you specify an URL with user
name, the entered password will be cached so that futute URL refer-
ences can use it.
version
Print lftp version.
wait [jobno]
wait all
Wait for specified job to terminate. If jobno is omitted, wait for
last backgrounded job.
'wait all' waits for all jobs termination.
zcat files
Same as cat, but filter each file through zcat. (See also cat, more
and zmore)
zmore files
Same as more, but filter each file through zcat. (See also cat, zcat
and more)
Settings
On startup, lftp executes ~/.lftprc and ~/.lftp/rc. You can place
aliases and 'set' commands there. Some people prefer to see full pro-
tocol debug, use 'debug' to turn the debug on.
There is also a system-wide startup file in /etc/lftp.conf. It can be
in different directory, see FILES section.
lftp has the following settable variables (you can also use 'set -a'
to see all variables and their values):
bmk:save-passwords (bool)
save plain text passwords in ~/.lftp/bookmarks on 'bookmark
add' command. Off by default.
cmd:at-exit (string)
the commands in string are executed before lftp exits.
cmd:csh-history (bool)
enables csh-like history expansion.
cmd:default-protocol (string)
The value is used when 'open' is used with just host name with-
out protocol. Default is 'ftp'.
cmd:fail-exit (bool)
if true, exit when an unconditional (without || and && at
begin) command fails.
cmd:long-running (seconds)
time of command execution, which is considered as 'long' and a
beep is done before next prompt. 0 means off.
cmd:ls-default (string)
default ls argument
cmd:move-background (boolean)
when false, lftp refuses to go to background when exiting. To
force it, use 'exit bg'.
cmd:prompt (string)
The prompt. lftp recognizes the following backslash-escaped
special characters that are decoded as follows:
\@ insert @ if current user is not default
\a an ASCII bell character (07)
\e an ASCII escape character (033)
\h the hostname you are connected to
\n newline
\s the name of the client (lftp)
\S current slot name
\u the username of the user you are logged in as
\U the URL of the remote site (e.g.,
ftp://g437.ub.gu.se/home/james/src/lftp)
\v the version of lftp (e.g., 2.0.3)
\w the current working directory at the remote site
\W the base name of the current working directory at the
remote site
\nnn the character corresponding to the octal number nnn
\\ a backslash
\? skips next character if previous substitution was empty.
\[ begin a sequence of non-printing characters, which could
be used to embed a terminal control sequence into the
prompt
\] end a sequence of non-printing characters
cmd:remote-completion (bool)
a boolean to control whether or not lftp uses remote comple-
tion.
cmd:verify-host (bool)
if true, lftp resolves host name immediately in 'open' command.
It is also possible to skip the check for a single 'open' com-
mand if '&' is given, or if ^Z is pressed during the check.
cmd:verify-path (bool)
if true, lftp checks the path given in 'cd' command. It is
also possible to skip the check for a single 'cd' command if
'&' is given, or if ^Z is pressed during the check. Examples:
set cmd:verify-path/hftp://* false
cd directory &
dns:SRV-query (bool)
query for SRV records and use them before gethostbyname. The
SRV records are only used if port is not explicitly specified.
See RFC2052 for details.
dns:cache-enable (bool)
enable DNS cache. If it is off, lftp resolves host name each
time it reconnects.
dns:cache-expire (time interval)
time to live for DNS cache entries. It has format +, e.g. 1d12h30m5s or just 36h. To disable expira-
tion, set it to 'inf' or 'never'.
dns:cache-size (number)
maximum number of DNS cache entries.
dns:fatal-timeout (seconds)
limit the time for DNS queries. If DNS server is unavailable
too long, lftp will fail to resolve a given host name. 0 means
unlimited, the default.
dns:order (list of protocol names)
sets the order of DNS queries. Default is ''inet inet6'' which
means first look up address in inet family, then inet6 and use
first matched.
dns:use-fork (bool)
if true, lftp will fork before resolving host address. Default
is true.
file:charset (string)
local character set. It is set from current locale initially.
fish:connect-program (string)
the program to use for connecting to remote server. It should
support '-l' option for user name, '-p' for port number.
Default is 'ssh -ax'. You can set it to 'rsh', for example.
fish:shell (string)
use specified shell on server side. Default is /bin/sh. On some
systems, /bin/sh exits when doing cd to a non-existent
directory. lftp can handle that but it has to reconnect. Set it
to /bin/bash for such systems if bash is installed.
ftp:acct (string)
Send this string in ACCT command after login. The result is
ignored. The closure for this setting has format user@host.
ftp:anon-pass (string)
sets the password used for anonymous ftp access authentication.
Default is "-name@", where name is the username of the user
running the program.
ftp:anon-user (string)
sets the user name used for anonymous ftp access authentica-
tion. Default is "anonymous".
ftp:auto-sync-mode (regex)
if first server message metches this regex, turn on sync mode
for that host.
ftp:charset (string)
the character set used by ftp server in requests, replies and
file listings. Default is empty which means the same as local.
This setting is only used when the server does not support
UTF8.
ftp:client (string)
the name of ftp client to send with CLNT command, if supported
by server. If it is empty, then no CLNT command will be sent.
ftp:bind-data-socket (bool)
bind data socket to the interface of control connection (in
passive mode). Default is true, exception is the loopback
interface.
ftp:fix-pasv-address (bool)
if true, lftp will try to correct address returned by server
for PASV command in case when server address is in public net-
work and PASV returns an address from a private network. In
this case lftp would substitute server address instead of the
one returned by PASV command, port number would not be changed.
Default is true.
ftp:fxp-passive-source (bool)
if true, lftp will try to set up source ftp server in passive
mode first, otherwise destination one. If first attempt fails,
lftp tries to set them up the other way. If the other disposi-
tion fails too, lftp falls back to plain copy. See also
ftp:use-fxp.
ftp:home (string)
Initial directory. Default is empty string which means auto.
Set this to '/' if you don't like the look of %2F in ftp URLs.
The closure for this setting has format user@host.
ftp:list-empty-ok (bool)
if set to false, empty lists from LIST command will be treated
as incorrect, and another method (NLST) will be used.
ftp:list-options (string)
sets options which are always appended to LIST command. It can
be useful to set this to '-a' if server does not show dot (hid-
den) files by default. Default is empty.
ftp:nop-interval (seconds)
delay between NOOP commands when downloading tail of a file.
This is useful for ftp servers which send "Transfer complete"
message before flushing data transfer. In such cases NOOP com-
mands can prevent connection timeout.
ftp:passive-mode (bool)
sets passive ftp mode. This can be useful if you are behind a
firewall or a dumb masquerading router. In passive mode lftp
uses PASV command, not the PORT command which is used in active
mode. In passive mode lftp itself makes the data connection to
the server; in active mode the server connects to lftp for data
transfer. Passive mode is the default.
ftp:port-ipv4 (ipv4 address)
specifies an IPv4 address to send with PORT command. Default is
empty which means to send the address of local end of control
connection.
ftp:port-range (from-to)
allowed port range for active mode. Format is min-max, or
'full' or 'any' to indicate any port. Default is 'full'.
ftp:proxy (URL)
specifies ftp proxy to use. To disable proxy set this to empty
string. Note that it is an ftp proxy which uses ftp protocol,
not ftp over http. Default value is taken from environment
variable ftp_proxy if it starts with ''ftp://''. If your ftp
proxy requires authentication, specify user name and password
in the URL.
If ftp:proxy starts with http://, hftp (ftp over http proxy) is used
instead of ftp automatically.
ftp:rest-list (bool)
allow usage of REST command before LIST command. This might be
useful for large directories, but some ftp servers silently
ignore REST before LIST.
ftp:rest-stor (bool)
if false, lftp will not try to use REST before STOR. This can
be useful for some buggy servers which corrupt (fill with
zeros) the file if REST followed by STOR is used.
ftp:retry-530 (regex)
Retry on server reply 530 for PASS command if text matches this
regular expression. This setting should be useful to distin-
guish between overloaded server (temporary condition) and
incorrect password (permanent condition).
ftp:retry-530-anonymous (regex)
Additional regular expression for anonymous login, like
ftp:retry-530.
ftp:site-group (string)
Send this string in SITE GROUP command after login. The result
is ignored. The closure for this setting has format user@host.
ftp:skey-allow (bool)
allow sending skey/opie reply if server appears to support it.
On by default.
ftp:skey-force (bool)
do not send plain text password over the network, use skey/opie
instead. If skey/opie is not available, assume failed login.
Off by default.
ftp:ssl-allow (bool)
if true, try to negotiate SSL connection with ftp server for
non-anonymous access. Default is true. This setting is only
available if lftp was compiled with openssl.
ftp:ssl-force (bool)
if trus, refuse to send password in clear when server does not
support SSL. Default is false. This setting is only available
if lftp was compiled with openssl.
ftp:ssl-protect-data (bool)
if true, request ssl connection for data transfers. This is
cpu-intensive but provides privacy. Default is false. This set-
ting is only available if lftp was compiled with openssl.
ftp:ssl-protect-fxp (bool)
if true, request ssl connection for data transfer between two
ftp servers in FXP mode. CPSV or SSCN command will be used in
that case. If ssl connection fails for some reason, lftp would
try unprotected FXP transfer unless ftp:ssl-force is set for
any of the two servers. Default is false.
ftp:ssl-protect-list (bool)
if true, request ssl connection for file list transfers.
Default is true.
ftp:stat-interval (seconds)
interval between STAT commands. Default is 1.
ftp:sync-mode (bool)
if true, lftp will send one command at a time and wait for
response. This might be useful if you are using a buggy ftp
server or router. When it is off, lftp sends a pack of commands
and waits for responses - it speeds up operation when round
trip time is significant. Unfortunately it does not work with
all ftp servers and some routers have troubles with it, so it
is on by default.
ftp:timezone (string)
Assume this timezone for time in listings returned by LIST com-
mand. This setting can be GMT offset [+|-]HH[:MM[:SS]] or any
valid TZ value (e.g. Europe/Moscow or
MSK-3MSD,M3.5.0,M10.5.0/3). The default is GMT. Set it to an
empty value to assume local timezone specified by environment
variable TZ.
ftp:use-abor (bool)
if false, lftp does not send ABOR command but closes data con-
nection immediately.
ftp:use-feat (bool)
when true (default), lftp uses FEAT command to determine
extended features of ftp server.
ftp:use-fxp (bool)
if true, lftp will try to set up direct connection between two
ftp servers.
ftp:use-hftp (bool)
when ftp:proxy points to an http proxy, this setting selects
hftp method (GET, HEAD) when true, and CONNECT method when
false. Default is true.
ftp:lang (bool)
the language selected with LANG command, if supported as indi-
cated by FEAT response. Default is empty which means server
default.
ftp:use-mdtm (bool)
when true (default), lftp uses MDTM command to determine file
modification time.
ftp:use-mdtm-overloaded (bool)
when true, lftp uses two argument MDTM command to set file mod-
ification time on uploaded files. Default is false.
ftp:use-site-idle (bool)
when true, lftp sends 'SITE IDLE' command with net:idle argu-
ment. Default is false.
ftp:use-site-utime (bool)
when true, lftp sends 'SITE UTIME' command to set file modifi-
cation time on uploaded files. Default is true.
ftp:use-size (bool)
when true (default), lftp uses SIZE command to determine file
size.
ftp:use-stat (bool)
if true, lftp sends STAT command in FXP mode transfer to know
how much data has been transferred. See also ftp:stat-interval.
Default is true.
ftp:use-telnet-iac (bool)
when true (default), lftp uses TELNET IAC command and follows
TELNET protocol as specified in RFC959. When false, it does not
follow TELNET protocol and thus does not double 255 (0xFF,
0377) character and does not prefix ABOR and STAT commands with
TELNET IP+SYNCH signal.
ftp:use-quit (bool)
if true, lftp sends QUIT before disconnecting from ftp server.
Default is true.
ftp:verify-address (bool)
verify that data connection comes from the network address of
control connection peer. This can possibly prevent data connec-
tion spoofing which can lead to data corruption. Unfortunately,
this can fail for sertain ftp servers with several network
interfaces, when they do not set outgoing address on data
socket, so it is disabled by default.
ftp:verify-port (bool)
verify that data connection has port 20 (ftp-data) on its
remote end. This can possibly prevent data connection spoofing
by users of remote host. Unfortunately, too many windows and
even unix ftp servers forget to set proper port on data connec-
tion, thus this check is off by default.
ftp:web-mode (bool)
disconnect after closing data connection. This can be useful
for totally broken ftp servers. Default is false.
hftp:cache (bool)
allow server/proxy side caching for ftp-over-http protocol.
hftp:proxy (URL)
specifies http proxy for ftp-over-http protocol (hftp). The
protocol hftp cannot work without a http proxy, obviously.
Default value is taken from environment variable ftp_proxy if
it starts with ''http://'', otherwise from environment variable
http_proxy. If your ftp proxy requires authentication, specify
user name and password in the URL.
hftp:use-authorization (bool)
if set to off, lftp will send password as part of URL to the
proxy. This may be required for some proxies (e.g. M-soft).
Default is on, and lftp will send password as part of Autho-
rization header.
hftp:use-head (bool)
if set to off, lftp will try to use 'GET' instead of 'HEAD' for
hftp protocol. While this is slower, it may allow lftp to work
with some proxies which don't understand or mishandle ''HEAD
ftp://'' requests.
hftp:use-type (bool)
If set to off, lftp won't try to append ';type=' to URLs passed
to proxy. Some broken proxies don't handle it correctly.
Default is on.
http:accept, http:accept-charset, http:accept-language (string)
specify corresponding HTTP request headers.
http:cache (bool)
allow server/proxy side caching.
http:cookie (string)
send this cookie to server. A closure is useful here:
set cookie/www.somehost.com "param=value"
http:post-content-type (string)
specifies value of Content-Type http request header for POST
method. Default is ''application/x-www-form-urlencoded''.
http:proxy (URL)
specifies http proxy. It is used when lftp works over http pro-
tocol. Default value is taken from environment variable
http_proxy. If your proxy requires authentication, specify
user name and password in the URL.
http:put-method (PUT or POST)
specifies which http method to use on put.
http:put-content-type (string)
specifies value of Content-Type http request header for PUT
method.
http:referer (string)
specifies value for Referer http request header. Single dot '.'
expands to current directory URL. Default is '.'. Set to empty
string to disable Referer header.
http:set-cookies (boolean)
if true, lftp modifies http:cookie variables when Set-Cookie
header is received.
http:user-agent (string)
the string lftp sends in User-Agent header of HTTP request.
https:proxy (string)
specifies https proxy. Default value is taken from environment
variable https_proxy.
mirror:exclude-regex (regex)
specifies default exclusion pattern. You can override it by
--include option.
mirror:order (list of patterns)
specifies order of file transfers. E.g. setting this to "*.sfv
*.sum" makes mirror to transfer files matching *.sfv first,
then ones matching *.sum and then all other files. To process
directories after other files, add "*/" to end of pattern list.
mirror:parallel-directories (boolean)
if true, mirror will start processing of several directories in
parallel when it is in parallel mode. Otherwise, it will
transfer files from a single directory before moving to other
directories.
mirror:parallel-transfer-count (number)
specifies number of parallel transfers mirror is allowed to
start. Default is 1. You can override it with --parallel
option.
mirror:use-pget-n (number)
specifies -n option for pget command used to transfer every
single file under mirror. Default is 1 which disables pget.
module:path (string)
colon separated list of directories to look for modules. Can be
initialized by environment variable LFTP_MODULE_PATH. Default
is 'PKGLIBDIR/VERSION:PKGLIBDIR'.
net:connection-limit (number)
maximum number of concurrent connections to the same site. 0
means unlimited.
net:connection-takeover (bool)
if true, foreground connections have priority over background
ones and can interrupt background transfers to complete a fore-
ground operation.
net:idle (seconds)
disconnect from server after that number of idle seconds.
net:limit-rate (bytes per second)
limit transfer rate on data connection. 0 means unlimited. You
can specify two numbers separated by colon to limit download
and upload rate separately.
net:limit-max (bytes)
limit accumulating of unused limit-rate. 0 means unlimited.
net:limit-total-rate (bytes per second)
limit transfer rate of all connections in sum. 0 means unlim-
ited. You can specify two numbers separated by colon to limit
download and upload rate separately. Note that sockets have
receive buffers on them, this can lead to network link load
higher than this rate limit just after transfer beginning. You
can try to set net:socket-buffer to relatively small value to
avoid this.
net:limit-total-max (bytes)
limit accumulating of unused limit-total-rate. 0 means unlim-
ited.
net:max-retries (number)
the maximum number of sequential retries of an operation with-
out success. 0 means unlimited.
net:no-proxy (string)
contains comma separated list of domains for which proxy should
not be used. Default is taken from environment variable
no_proxy.
net:persist-retries (number)
ignore this number of hard errors. Useful to login to buggy ftp
servers which reply 5xx when there is too many users.
net:reconnect-interval-base (seconds)
sets the base minimal time between reconnects. Actual interval
depends on net:reconnect-interval-multiplier and number of
attempts to perform an operation.
net:reconnect-interval-max (seconds)
sets maximum reconnect interval. When current interval after
multiplication by net:reconnect-interval-multiplier reachs this
value (or exceeds it), it is reset back to net:reconnect-inter-
val-base.
net:reconnect-interval-multiplier (real number)
sets multiplier by which base interval is multiplied each time
new attempt to perform an operation fails. When the interval
reachs maximum, it is reset to base value. See net:reconnect-
interval-base and net:reconnect-interval-max.
net:socket-bind-ipv4 (ipv4 address)
bind all IPv4 sockets to specified address. This can be useful
to select a specific network interface to use. Default is empty
which means not to bind IPv4 sockets, operating system will
choose an address automatically using routing table.
net:socket-bind-ipv6 (ipv6 address)
the same for IPv6 sockets.
net:socket-buffer (bytes)
use given size for SO_SNDBUF and SO_RCVBUF socket options. 0
means system default.
net:socket-maxseg (bytes)
use given size for TCP_MAXSEG socket option. Not all operating
systems support this option, but linux does.
net:timeout (seconds)
sets the network protocol timeout.
sftp:connect-program (string)
the program to use for connecting to remote server. It should
support '-l' option for user name, '-p' for port number.
Default is 'ssh -ax'. You can set it to 'rsh', for example.
sftp:max-packets-in-flight (number)
The maximum number of unreplied packets in flight. If round
trip time is significant, you should increase this and size-
read/size-write. Default is 3.
sftp:protocol-version (number)
The protocol number to negotiate. Default is 4. The actual pro-
tocol version used depends on server.
sftp:server-program (string)
The server program implementing SFTP protocol. If it does not
contain a slash '/', it is considered a ssh2 subsystem and -s
option is used when starting connect-program. Default is
'sftp'. You can use rsh as transport level protocol like this:
set sftp:connect-program rsh
set sftp:server-program /usr/libexec/openssh/sftp-server
Similarly you can run sftp over ssh1.
sftp:size-read (number)
Block size for reading. Default is 0x8000.
sftp:size-write (number)
Block size for writing. Default is 0x8000.
ssl:ca-file (path to file)
use specified file as Certificate Authority certificate.
ssl:ca-path (path to directory)
use specified directory as Certificate Authority certificate
repository.
ssl:crl-file (path to file)
use specified file as Certificate Revocation List certificate.
ssl:crl-path (path to directory)
use specified directory as Certificate Revocation List certifi-
cate repository.
ssl:key-file (path to file)
use specified file as your private key.
ssl:cert-file (path to file)
use specified file as your certificate.
ssl:verify-certificate (boolean)
if set to yes, then verify server's certificate to be signed by
a known Certificate Authority and not be on Certificate Revoca-
tion List.
xfer:clobber (bool)
if this setting is off, get commands will not overwrite exist-
ing files and generate an error instead. Default is on.
xfer:eta-period (seconds)
the period over which wheighted average rate is calculated to
produce ETA.
xfer:eta-terse (bool)
show terse ETA (only high order parts). Default is true.
xfer:max-redirections (number)
maximum number of redirections. This can be useful for down-
loading over HTTP. Default is 0, which prohibits redirections.
xfer:rate-period (seconds)
the period over which wheighted average rate is calculated to
be shown.
The name of variables can be abbreviated unless it becomes ambiguous.
The prefix before ':' can be omitted too. You can set one variable
several times for different closures, and thus you can get a particu-
lar settings for particular state. The closure is to be specified
after variable name separated with slash '/'.
The closure for 'dns:', 'net:', 'ftp:', 'http:', 'hftp:' domain vari-
ables is currently just the host name as you specify it in the 'open'
command (with some exceptions where closure is meaningless, e.g.
dns:cache-size). For some 'cmd:' domain variables the closure is cur-
rent URL without path. For other variables it is not currently used.
See examples in the sample lftp.conf.
Certain commands and settings take a time interval parameter. It has
the format Nx[Nx...], where N is time amount and x is time unit: d -
days, h - hours, m - minutes, s - seconds. Default unit is second.
E.g. 5h30m. Also the interval can be 'infinity', 'inf', 'never',
'forever' - it means infinite interval. E.g. 'sleep forever' or 'set
dns:cache-expire never'.
FTP asynchronous mode (pipelining)
Lftp can speed up ftp operations by sending several commands at once
and then checking all the responses. See ftp:sync-mode variable. Some-
times this does not work, thus synchronous mode is the default. You
can try to turn synchronous mode off and see if it works for you. It
is known that some network software dealing with address translation
works incorrectly in the case of several FTP commands in one network
packet.
RFC959 says: ''The user-process sending another command before the
completion reply would be in violation of protocol; but server-FTP
processes should queue any commands that arrive while a preceding com-
mand is in progress''. Also, RFC1123 says: ''Implementors MUST NOT
assume any correspondence between READ boundaries on the control con-
nection and the Telnet EOL sequences (CR LF).'' and ''a single READ
from the control connection may include more than one FTP command''.
So it must be safe to send several commands at once, which speeds up
operation a lot and seems to work with all Unix and VMS based ftp
servers. Unfortunately, windows based servers often cannot handle sev-
eral commands in one packet, and so cannot some broken routers.
OPTIONS
-d Switch on debugging mode
-e commands
Execute given commands and don't exit.
-p port
Use the given port to connect
-u user[,pass]
Use the given username and password to connect
-f script_file
Execute commands in the file and exit
-c commands
Execute the given commands and exit
ENVIRONMENT VARIABLES
The following environment variables are processed by lftp:
HOME Used for (local) tilde ('~') expansion
SHELL Used by the ! command to determine the shell to run.
PAGER This should be the name of the pager to use. It's used by the
more and zmore commands.
http_proxy, https_proxy
Used to set initial http:proxy, hftp:proxy and https:proxy
variables.
ftp_proxy
Used to set initial ftp:proxy or hftp:proxy variables, depend-
ing on URL protocol used in this environment variable.
no_proxy
Used to set initial net:no-proxy variable.
LFTP_MODULE_PATH
Used to set initial module:path variable.
FILES
/etc/lftp.conf
system-wide startup file. Actual location depends on
--sysconfdir configure option. It is /etc when prefix is /usr,
/usr/local/etc by default.
~/.lftp/rc, ~/.lftprc
These files are executed on lftp startup after /etc/lftp.conf.
~/.lftp/log
The file things are logged to when lftp moves into the back-
ground in nohup mode.
~/.lftp/bookmarks
The file is used to store lftp's bookmarks. See the bookmark
command.
~/.lftp/cwd_history
The file is used to store last working directories for each
site visited.
~/.netrc
The file is consulted to get default login and password to ftp
server. Passwords are also searched here if an URL with user
name but with no password is used.
SEE ALSO
ftpd(8), ftp(1)
RFC854 (telnet), RFC959 (ftp), RFC1123, RFC1945 (http/1.0), RFC2052
(SRV RR), RFC2068 (http/1.1), RFC2228 (ftp security extensions),
RFC2389 (ftp FEAT), RFC2428 (ftp/ipv6), RFC2640 (ftp i18n).
http://www.ietf.org/internet-drafts/draft-murray-auth-ftp-ssl-11.txt
(ftp over ssl),
http://www.ietf.org/internet-drafts/draft-ietf-ftpext-mlst-16.txt (ftp
extensions over RFC959),
http://www.ietf.org/internet-drafts/draft-ietf-secsh-filexfer-04.txt
(sftp).
AUTHOR
Alexander V. Lukyanov
lav@yars.free.net
ACKNOWLEDGMENTS
This manual page was originally written by Christoph Lameter , for the Debian GNU/Linux system. The page was
improved by Nicolas Lichtmaier , James Troup
and Alexander V. Lukyanov
.
18 May 2004 lftp(1)
UNIX/Linux commands referenced on this page:
- file
- man
- ftp
- sftp
- openssl
- ssh
- as
- which
- ls
- nohup
- at
- time
- dir
- less
- import
- size
- cat
- more
- zcat
- chmod
- echo
- last
- find
- expand
- basename
- write
- kill
- links
- refer
- replace
- mkdir
- make
- mv
- net
- reset
- rm
- rmdir
- sleep
- info
- zmore
- host
- false
- hostname
- true
- enable
- disable
- look
- locale
- bash
- clear
- users
- GET
- HEAD
- login
- rsh
- yes