Learn the UNIX/Linux command line
Home Man Pages
PINFO(1) PINFO(1)
NAME
pinfo - curses based lynx-style info browser
SYNTAX
pinfo [options] [infopage]
DESCRIPTION
This is a program for viewing info files. You specify which page you
want to read by passing it an infopage argument. This argument con-
tains the name of an info page (i.e. 'bash'). The program will then
(by default) search for it in ./, /usr/info, /usr/share/info, and
/usr/local/info. The searchpath can be adjusted by INFOPATH environ-
ment variable or in config file. Pinfo will also automaticaly add the
suffix '-info', '-info.Z', '-info.gz', or '-info.bz2'. At present
other suffixes are not recognized, but you can easily add them to the
function openinfo() in filehandling_functions.c.
When the search for info pages fails, man is called with the infopage
argument, and it's output is parsed by pinfo. This means that when you
don't have the appropriate info page, but have a man page instead; the
man page will be viewed.
When no infopage is specified, the default 'dir' page is shown.
Supported options are
-h, --help - print help information and exit.
-v, --version - print version information and exit.
-m, --manual - uses manual page instead of info by default. (pinfo -m
could be used as a manual pager). Warning: Everything what follows
this option is passed to the 'man' program. Don't be confused if pinfo
options, which followed '-m' don't work. When using this option, pinfo
does not parse the info options as ussual! It invokes the man part of
program.
You can also call the man function of pinfo in another way. When pinfo
is called with an argv[0] (the program file name), which contains the
word 'man' in it's name, the man functions are enabled automatically.
Previously there was a symlink to pinfo, called pman, but I had to
remove it from the distribution, since it's name was in conflict with
some other utility. Anyway, you can feel free to create such a link if
you wish.
-r, --raw-filename - uses a raw filename first (i.e. the name which
you specified as infopage is considered to be a real file in the spec-
ified location).
-f, --file synonym for -r.
-a, --apropos - if this is set, apropos is called when no man or info
page could be found.
-c, --cut-man-headers - if this is set, man parsing code will try to
cut out the repeated man headers. Use with care. ;)
-s, --squeeze-lines- cut empty lines from manual pages. This option
enables autocutting of every repeated newline in a manual page.
-t, --force-manual-tag-table- forces manual detection of tag table.
This allows you to view info pages, which may be corrupted. (as i.e.
version of jed's pages, shipped with RH5.0). The tag table corruption
ussualy appears in that the info links, which you follow, move you to
quite unexpected nodes.
--node=nodename, --node nodename- Go to the node 'nodename' of info
file. Since 0.6.7 it is also possible to specify nodes as in stan-
dalone info via filenames, like '(gcc)Introduction'.
--rcfile=filename, --rcfile filename- Use alternate rcfile.
--long-manual-links, -l- Use long link names in manuals. On some sys-
tems the manual hierarchy is divided into subsections like '3ncurses',
etc, while on other systems all belongs to section '3'. If this option
is what your system is like, feel free to use it.
--clear-at-exit, -x- Clear screen at exit.
The options are handled by GNU getopt, so you can here (as in other
programs) abbreviate the option names to the minimal number of charac-
ters by which the options differ.
Warning! If you do not have getopt, these options will not work!
DEFAULT KEYS WHEN BROWSING INFO FILE
Just take a look at the example config file (below), and at the key
descriptions. Keys available in manual viewer differ a bit from the
keys available in info viewer.
ENVIRONMENT
There is a variable $INFOPATH, which can specify the paths to be
searched for info files. It's format is similar to that of the $PATH
variable. An example setting could look like:
/usr/info:/usr/somewhere/info:/not/even/in/usr/info
etc. Directories are separated by colons.
COLOR AND KEY DEFINITIONS
There are configuration files called ~/.pinforc and [prefix]/etc/pin-
forc, for local and global configuration (where prefix is the prefix
of the directory, where pinfo is installed, i.e. /usr/local, or /).
Here's an example of such a file; we'll discuss the contents below:
# Here are some colour setting.
# Whitespace between the entries is optional.
COL_NORMAL = COLOR_WHITE, COLOR_BLACK, NO_BOLD, NO_BLINK
COL_MENUSELECTED = COLOR_RED, COLOR_BLACK, BOLD, NO_BLINK
COL_MENU=COLOR_BLUE,COLOR_BLACK,BOLD, NO_BLINK
COL_NOTESELECTED=COLOR_RED,COLOR_BLACK,BOLD, NO_BLINK
COL_NOTE=COLOR_GREEN,COLOR_BLACK,BOLD, NO_BLINK
COL_TOPLINE=COLOR_YELLOW,COLOR_BLUE,BOLD, NO_BLINK
COL_BOTTOMLINE=COLOR_YELLOW,COLOR_BLUE,BOLD, NO_BLINK
COL_MANUALBOLD=COLOR_WHITE,COLOR_BLACK,BOLD, NO_BLINK
COL_MANUALITALIC=COLOR_WHITE,COLOR_BLACK,BOLD, NO_BLINK
COL_URL=COLOR_MAGENTA,COLOR_BLACK,BOLD, NO_BLINK
COL_URLSELECTED=COLOR_RED,COLOR_BLACK,NO_BOLD, NO_BLINK
COL_INFOHIGHLIGHT=COLOR_WHITE,COLOR_BLACK,BOLD, NO_BLINK
#
# Here are some keybindings as well...
#
KEY_TOTALSEARCH_1 = 's'
KEY_TOTALSEARCH_2 = 'S'
KEY_SEARCH_1 = '/'
KEY_SEARCH_2 = '.'
KEY_GOTO_1='g'
KEY_GOTO_2='m'
KEY_HOME_1='h'
KEY_HOME_2='H'
KEY_PREVNODE_1='p'
KEY_PREVNODE_2='P'
KEY_NEXTNODE_1='n'
KEY_NEXTNODE_2='N'
KEY_UP_1=KEY_UP
KEY_UP_2='u'
KEY_END_1=KEY_END
KEY_END_2='e'
KEY_PGDN_1=KEY_NPAGE
KEY_PGDN_2=' '
KEY_PGDN_AUTO_1=0
KEY_PGDN_AUTO_2=' '
KEY_PGUP_1=KEY_PPAGE
KEY_PGUP_2='b'
KEY_PGUP_AUTO_1=0
KEY_PGUP_AUTO_2='b'
KEY_DOWN_1=KEY_DOWN
KEY_DOWN_2='d'
KEY_TOP_1=KEY_HOME
KEY_TOP_2='t'
KEY_BACK_1=KEY_LEFT
KEY_BACK_2='l'
KEY_FOLLOWLINK_1=KEY_RIGHT
KEY_FOLLOWLINK_2='0
# 12 is a code for ctrl+l
KEY_REFRESH_1=12
KEY_REFRESH_2='~'
KEY_SHELLFEED_1='!'
KEY_SHELLFEED_2='1'
KEY_QUIT_1='q'
KEY_QUIT_2='Q'
KEY_DIRPAGE_1='d'
KEY_DIRPAGE_2='D'
KEY_GOLINE_1='l'
KEY_GOLINE_2=0
KEY_PRINT_1=']'
KEY_PRINT_2=0
#
# Some options, explained in the man page
#
MANUAL=false
CUT-MAN-HEADERS=true
CUT-EMPTY-MAN-LINES=true
RAW-FILENAME=false
APROPOS=false
DONT-HANDLE-WITHOUT-TAG-TABLE=false
LONG-MANUAL-LINKS=false
FILTER-0xB7=true
QUIT-CONFIRMATION=false
QUIT-CONFIRM-DEFAULT=no
CLEAR-SCREEN-AT-EXIT=true
STDERR-REDIRECTION="2> /dev/null"
HTTPVIEWER=lynx
FTPVIEWER=lynx
MAILEDITOR=pine
MANLINKS=1:8:2:3:4:5:6:7:9:n:p:o:3X11:3Xt
INFOPATH=/usr/info:/usr/share/info:/usr/local/info
HIGHLIGHTREGEXP=Bash.*has
SAFE-USER=nobody
SAFE-GROUP=nobody
As you can see, the format is simple. First I'll explain the color
definitions. First you must enter a color name (all available color
names are present in the example, and they're self explanatory, I
think. There is also a special color COLOR_DEFAULT, which stands for
transparency). Then you enter the foreground color, and the background
color. The BOLD attribute means that we want the foreground color to
be highlighted. (i.e. lightblue, lightgreen). BLINK attribute is the
blinking attribute, or highlighted background in some other configura-
tions.
Now let's move to the key definitions. Here we first put a key name
(again all keys are present in the example); then we enter it's value
-- either surrounded by apostrophes, or a keycode number (like in
KEY_REFRESH_1), or its mnemonic code name if it's a special key (like
i.e. in KEY_FOLLOWLINK_1).
If you wish to specify key by code value, use the supplied program
'testkey' to obtain the needed value. It mainly is a feature, when you
want to add some ctrl+letter keybindings, and similar.
For each function you can bind two keys, i.e. you could bind both
Enter and Cursor Right to the FollowLink-function. As you can see in
the example above, the two key names are KEY_FOLLOWLINK_1 and KEY_FOL-
LOWLINK_2.
Here's an explanation of the key names:
KEY_TOTALSEARCH_1
Key for searching through all nodes of info file.
KEY_TOTALSEARCH_2
Alternate key for searching through all nodes of info
file.
KEY_SEARCH_1
Key for searching through current node (or manual).
KEY_SEARCH_2
Alternate key for searching through current node (or
manual).
KEY_SEARCH_AGAIN_1
Key for repeating the last search.
KEY_SEARCH_AGAIN_2
Alternate key for repeating the last search.
KEY_GOTO_1
Key for explicitly going to a node (by specifing it's
name).
KEY_GOTO_2
Alternate key for explicitly going to a node (by
specifing it's name).
KEY_PREVNODE_1
Key for going to a node marked as 'Prev' in the
header. In manpage viewer this goes to the previous
man section.
KEY_PREVNODE_2
Alternate key for going to a node marked as 'Prev' in
the header. In manpage viewer this goest to the
previous man section.
KEY_NEXTNODE_1
Key for going to a node marked as 'Next' in the
header. In manpage viewer this goes to the next man
section.
KEY_NEXTNODE_2
Alternate key for going to a node marked as 'Next' in
the header. In manpage viewer this goes to the next
man section.
KEY_UP_1 Key for scrolling text one line up.
KEY_UP_2 Alternate key for scrolling text one line up.
KEY_END_1 Key for going to the end of the node.
KEY_END_2 Alternate key for going to the end of the node.
KEY_PGDN_1
Key for going one page down in the viewed node.
KEY_PGDN_2
Alternate key for going one page down in the viewed
node.
KEY_PGDN_AUTO_1
Key for going to the next node when you're at the end
of node (default is zero -- turned off).
KEY_PGDN_AUTO_2
Alternate key for going to the next node when you're
at the end of node (default is space, as for pgdn_2).
KEY_HOME_1
Key for going to the beginning of the node.
KEY_HOME_2
Alternate key for going to the beginning of the node.
KEY_PGUP_1
Key for going one page up in the viewed node.
KEY_PGUP_2
Alternate key for going one page up in the viewed
node.
KEY_PGUP_AUTO_1
Key for going to the 'up' node, when being at the top
of node. (Default value is zero -- turned off).
KEY_PGUP_AUTO_2
Alternate key for going to the 'up' node, when being
at the top of node. (Default value is '-', as for
pgup_2).
KEY_DOWN_1
Key for scrolling the text down one line.
KEY_DOWN_2
Alternate key for scrolling the text down one line.
KEY_TOP_1 Key for going to the top (first) node.
KEY_TOP_2 Alternate key for going to the top (first) node.
KEY_BACK_1
Key for going back (in the history of viewed nodes).
KEY_BACK_2
Alternate key for going back (in the history of
viewed nodes).
KEY_FOLLOWLINK_1
Key for following a hypertext link.
KEY_FOLLOWLINK_2
Alternate key for following a hypertext link.
KEY_REFRESH_1
Key for refreshing the screen (hardcoded is the ^L
value).
KEY_REFRESH_2
Alternate key for refreshing the screen.
KEY_SHELLFEED_1
Key for calling a shell command, and passing the
viewed node to the stdin of that command.
KEY_SHELLFEED_2
Alternate key for calling a shell command, and pass-
ing the viewed node to the stdin of that command.
KEY_QUIT_1
Key for exiting the program.
KEY_QUIT_2
Alternate key for exiting the program.
KEY_GOLINE_1
Key for going to a specified line in file.
KEY_GOLINE_2
Alternate key for going to a specified line in file.
KEY_PRINT_1
Key for printing viewed node or man page.
KEY_PRINT_2
Alternate key for printing viewed node or man page.
The special mnemonics for keys (which are defined at present) are:
KEY_BREAK
KEY_DOWN
KEY_UP
KEY_LEFT
KEY_RIGHT
KEY_DOWN
KEY_HOME
KEY_BACKSPACE
KEY_NPAGE
KEY_PPAGE
KEY_END [Note: this works probably ONLY with linux ncurses]
KEY_F(x)
KEY_CTRL('c')
- this assigns the key value to a ctrl+c combination.
c may be any letter you wish.
KEY_ALT('c')
- this assigns the key value to a alt+c combination.
c may be any letter you wish. If alt key won't work,
you may use ESC+key combination.
'c' - this means a printable character c. The syntax is
just like in C/C++ ;).
[number] - you can also specify key as it's code number. It is
useful e.g. when specifing control keys, and some
nonstandard keys. A numerical value of zero turns
given keybinding off.
See manual page for curs_getch (3x) for description of their meaning.
Warning! Try not to create some serious keybinding conflicts!
The options in the last part of the example configuration file should
be fairly self-explanatory. The variables that can be set to true or
false do the same things as the commandline arguments with the same
names.
MANUAL If this is set to true the default is to first check
for a man page, instead of a texinfo file.
CUT-MAN-HEADERS
If set to true, then pinfo tries to cut off the
repeated headers throughout man pages.
CUT-EMPTY-MAN-LINES
If set to true, then pinfo tries to cut off the
repeated newlines (i.e. it will shorten each set of
consecutive newlines to one newline).
RAW-FILENAME
If set to true, the file argument is taken to be the
name of a file in the current working directory, i.e.
the directories in INFOPATH will only be searched if
a file with this name is not in the working direc-
tory.
APROPOS If set to true, apropos is called if no info or man
page is found.
DONT-HANDLE-WITHOUT-TAG-TABLE
If set to true , pinfo will not attempt to display
texinfo pages without tag tables.
HTTPVIEWER
Set this to the program you want to use to follow
http links in documents.
FTPVIEWER Set this to the program you want to use to follow ftp
links in documents.
MAILEDITOR
Set this to your favourite email program, and it will
be started if you follow an email link in a document.
PRINTUTILITY
Utility, which you use for printing. I.e. 'lpr'. If
you don't use any, you may also try something like
'cat >/dev/lp1', or sth. ;)
MANLINKS This specifies the section names, which may be refer-
enced in your man pages (i.e. Xtoolkit man pages
match the section 3Xt (see for example XtVaCreateWid-
get) manpage), Xlib function pages match section
3X11, etc. Such extensions may not be recognized by
default, so it is a good idea to add them).
INFOPATH This allows you to override the default searchpath
for info pages. The paths should be separated by
colons.
MAN-OPTIONS
This specifies the options, which should be passed to
the 'man' program. (see man(1) for description of
what they're like).
STDERR-REDIRECTION
Pinfo allows you to redirect the stderr output of
called programms. For example if you don't want to
see man's error messages about manual page format-
ting, you can use STDER-REDIRECTION="2> /dev/null".
This is the default.
LONG-MANUAL-LINKS
This is another true/false option, which decides
whether your system supports long manual section
names, or not. (i.e. "3ncurses" instead of "3").
FILTER-0xB7
This decides, whether you want to convert 0xb7 chars
to 'o', or not. For example for iso-8859-2 fonts this
makes man's list marks a bit nicer ;) (look for exam-
ple at perl's man page, to see how those marks look
like).
QUIT-CONFIRMATION
This decides whether you want to use quit confirma-
tion on exit, or not.
QUIT-CONFIRM-DEFAULT
This yes/no option determines the default answer to
the QUIT-CONFIRMATION dialog. (default answer is when
you press a key, that does not match the asked ques-
tion).
CLEAR-SCREEN-AT-EXIT
This true/false option determines if you want to have
your screen cleared at exit, or no.
CALL-READLINE-HISTORY
This true/false option determines if you want to have
a prompt of last history entry whenever calling read-
line wrapper, eg. in subsequent searches.
HIGHLIGHTREGEXP
This is an option, through which you may pass to
pinfo regexps, which should be highlighted when work-
ing with document. Warning! This may turn very slow
if you use it without care!
SAFE-USER This option is used to pass the name of user, to
which suid when pinfo is run with root privileges.
SAFE-GROUP
This option is used to pass the name of group, to
which suid when pinfo is run with root privileges.
INTERNATIONALIZATION SUPPORT
Pinfo implements general features of gnu gettext library (the thing,
which you need to see national messages ;). But it is not the end.
Pinfo allows you to use national info pages! You only need to put them
to your info directory, into a subdirectory, which is called '$LANG'.
LICENSE
This program is distributed under the terms of GPL.
BUGS
Please send bug reports to the author.
AUTHOR
Przemek Borys
If that E-mail address wont work (since the machine where it is being
handled is a bit damaged lately), you can try pborys@zeus.polsl.gli-
wice.pl, or pborys@p-soft.silesia.linux.org.pl.
There was also a lot of other people, who contributed to this code.
See the AUTHORS file.
COMMENTS
The author would like to read some comments and suggestions from you,
if any.
01 Dec 2001 PINFO(1)
UNIX/Linux commands referenced on this page: