Learn the UNIX/Linux command line
Home Man Pages
SED(1) User Commands SED(1)
NAME
sed - manual page for sed version 4.1.2
SYNOPSIS
sed [OPTION]... {script-only-if-no-other-script} [input-file]...
DESCRIPTION
Sed is a stream editor. A stream editor is used to perform basic text
transformations on an input stream (a file or input from a pipeline).
While in some ways similar to an editor which permits scripted edits
(such as ed), sed works by making only one pass over the input(s), and
is consequently more efficient. But it is sed's ability to filter
text in a pipeline which particularly distinguishes it from other
types of editors.
-n, --quiet, --silent
suppress automatic printing of pattern space
-e script, --expression=script
add the script to the commands to be executed
-f script-file, --file=script-file
add the contents of script-file to the commands to be executed
-i[SUFFIX], --in-place[=SUFFIX]
edit files in place (makes backup if extension supplied)
-c, --copy
use copy instead of rename when shuffling files in -i mode
(avoids change of input file ownership)
-l N, --line-length=N
specify the desired line-wrap length for the 'l' command
--posix
disable all GNU extensions.
-r, --regexp-extended
use extended regular expressions in the script.
-s, --separate
consider files as separate rather than as a single continuous
long stream.
-u, --unbuffered
load minimal amounts of data from the input files and flush the
output buffers more often
--help display this help and exit
--version
output version information and exit
If no -e, --expression, -f, or --file option is given, then the first
non-option argument is taken as the sed script to interpret. All
remaining arguments are names of input files; if no input files are
specified, then the standard input is read.
E-mail bug reports to: bonzini@gnu.org . Be sure to include the word
''sed'' somewhere in the ''Subject:'' field.
COMMAND SYNOPSIS
This is just a brief synopsis of sed commands to serve as a reminder
to those who already know sed; other documentation (such as the tex-
info document) must be consulted for fuller descriptions.
Zero-address ''commands''
: label
Label for b and t commands.
#comment
The comment extends until the next newline (or the end of a -e
script fragment).
} The closing bracket of a { } block.
Zero- or One- address commands
= Print the current line number.
a \
text Append text, which has each embedded newline preceded by a
backslash.
i \
text Insert text, which has each embedded newline preceded by a
backslash.
q Immediately quit the sed script without processing any more
input, except that if auto-print is not disabled the current
pattern space will be printed.
Q Immediately quit the sed script without processing any more
input.
r filename
Append text read from filename.
R filename
Append a line read from filename.
Commands which accept address ranges
{ Begin a block of commands (end with a }).
b label
Branch to label; if label is omitted, branch to end of script.
t label
If a s/// has done a successful substitution since the last
input line was read and since the last t or T command, then
branch to label; if label is omitted, branch to end of script.
T label
If no s/// has done a successful substitution since the last
input line was read and since the last t or T command, then
branch to label; if label is omitted, branch to end of script.
c \
text Replace the selected lines with text, which has each embedded
newline preceded by a backslash.
d Delete pattern space. Start next cycle.
D Delete up to the first embedded newline in the pattern space.
Start next cycle, but skip reading from the input if there is
still data in the pattern space.
h H Copy/append pattern space to hold space.
g G Copy/append hold space to pattern space.
x Exchange the contents of the hold and pattern spaces.
l List out the current line in a ''visually unambiguous'' form.
n N Read/append the next line of input into the pattern space.
p Print the current pattern space.
P Print up to the first embedded newline of the current pattern
space.
s/regexp/replacement/
Attempt to match regexp against the pattern space. If success-
ful, replace that portion matched with replacement. The
replacement may contain the special character & to refer to
that portion of the pattern space which matched, and the spe-
cial escapes \1 through \9 to refer to the corresponding match-
ing sub-expressions in the regexp.
w filename
Write the current pattern space to filename.
W filename
Write the first line of the current pattern space to filename.
y/source/dest/
Transliterate the characters in the pattern space which appear
in source to the corresponding character in dest.
Addresses
Sed commands can be given with no addresses, in which case the command
will be executed for all input lines; with one address, in which case
the command will only be executed for input lines which match that
address; or with two addresses, in which case the command will be exe-
cuted for all input lines which match the inclusive range of lines
starting from the first address and continuing to the second address.
Three things to note about address ranges: the syntax is addr1,addr2
(i.e., the addresses are separated by a comma); the line which addr1
matched will always be accepted, even if addr2 selects an earlier
line; and if addr2 is a regexp, it will not be tested against the line
that addr1 matched.
After the address (or address-range), and before the command, a ! may
be inserted, which specifies that the command shall only be executed
if the address (or address-range) does not match.
The following address types are supported:
number Match only the specified line number.
first~step
Match every step'th line starting with line first. For exam-
ple, ''sed -n 1~2p'' will print all the odd-numbered lines in
the input stream, and the address 2~5 will match every fifth
line, starting with the second. (This is an extension.)
$ Match the last line.
/regexp/
Match lines matching the regular expression regexp.
\cregexpc
Match lines matching the regular expression regexp. The c may
be any character.
GNU sed also supports some special 2-address forms:
0,addr2
Start out in "matched first address" state, until addr2 is
found. This is similar to 1,addr2, except that if addr2
matches the very first line of input the 0,addr2 form will be
at the end of its range, whereas the 1,addr2 form will still be
at the beginning of its range.
addr1,+N
Will match addr1 and the N lines following addr1.
addr1,~N
Will match addr1 and the lines following addr1 until the next
line whose input line number is a multiple of N.
REGULAR EXPRESSIONS
POSIX.2 BREs should be supported, but they aren't completely because
of performance problems. The \n sequence in a regular expression
matches the newline character, and similarly for \a, \t, and other
sequences.
BUGS
E-mail bug reports to bonzini@gnu.org. Be sure to include the word
''sed'' somewhere in the ''Subject:'' field. Also, please include the
output of ''sed --version'' in the body of your report if at all pos-
sible.
COPYRIGHT
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There
is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
LAR PURPOSE, to the extent permitted by law.
SEE ALSO
awk(1), ed(1), grep(1), tr(1), perlre(1), sed.info, any of various
books on sed, the sed FAQ (http://sed.sf.net/grabbag/tutorials/sed-
faq.html), http://sed.sf.net/grabbag/.
The full documentation for sed is maintained as a Texinfo manual. If
the info and sed programs are properly installed at your site, the
command
info sed
should give you access to the complete manual.
sed version 4.1.2 August 2006 SED(1)
UNIX/Linux commands referenced on this page: