sendiso(1)		       Linux IEEE 1394			   sendiso(1)



NAME
       sendiso - send IEEE 1394 isochronous packets from dump file

SYNOPSIS
       sendiso [ options ] FILE

DESCRIPTION
       sendiso	takes the dump file FILE as generated by dumpiso(1), extracts
       the packets and sends them as they were received (in the	 same  order,
       with  the  same	channel	 numbers) as fast as possible - timing of the
       original dump is not preserved.

       This program does not allocate  any  isochronous	 resources  but	 just
       starts  sending.	  It should not be used in live environments where it
       might interfere with properly set up isochronous transmissions, it  is
       a debug and performance benchmarking tool.

OPTIONS
       -l, --loop=COUNT
	      Send dump file COUNT times.  Defaults to 1.

       -i, --infinite
	      Send dump file in an endless loop.

       -s, --speed=SPEED
	      Send packets at speed SPEED, which can be given as 100, 200 and
	      400 (in Mbit/s) or abbreviated as 1, 2 and 4.  Defaults to 100.

       -p, --port=PORT
	      Choose  port  PORT  for sending.	A port is a 1394 card or chip
	      and represents one connected bus, therefore this is only	rele-
	      vant when you have multiple of these.  Defaults to 0.

       -h, --help
	      Show help text and exit.

BUGS
       None known.

SEE ALSO
       dumpiso(1), isodump(5)

AUTHOR
       Andreas Bombe 



			       libraw1394 1.0.0			   sendiso(1)

UNIX/Linux commands referenced on this page:

1. dump
2. file
3. as
4. at
5. which
6. card